Friedrich® Packaged Terminal Air Conditioner with Electric Heat - 7700 BTU Cool Friedrich PTACs are known for being feature-rich and backed by an AC-focused manufacturer. Our new models build on these strengths, with advanced engineering that delivers impressively quiet performance with expanded comfort settings. Features: Reduced sound levels: The two-motor design – one motor inside, one outside – allows the indoor motor to run at slower speeds, which sharply reduces indoor sound levels. Plus, the motors are permanently lubricated for quieter operation and increased durability. More comfort choices, quieter operation: Our 3-speed fan (cooling and heating modes) has nearly five times the surface area of a typical PTAC fan, allowing for more uniform airflow over a wider path. The result is faster, more even air distribution and quieter airflow. Guests/residents will appreciate having more comfort options. Plus, the soft start/stop fan delay reduces transitional noise usually associated with compressor start-up. Increased energy savings: Models have EERs up to 12.0 and COPs up to 3.4. Separate thermostat limits for cooling and heating provide greater control over temperature ranges. Of course, centralized desk control and compatibility with energy management systems can boost efficiency and lower operational costs. A universal heater/power cord simplifies installation, ordering: Installers can change the heat output simply by changing the standard power cord to the desired size. The optional cords connect as easily as a phone jack. Distributors can stock fewer PTAC models and optional power cords instead of numerous PTAC models. (Note: All wiring and building connections must be properly sized to accommodate the power cord. See model specifications for details. Note that Wall Sleeves and Wall Sleeve Grilles are sold separately. Includes a 20 AMP Power Cord. Unit Comes Standard With Corrosion Resistant Coils. Includes Industry Leading Parts and Service Warranty. Product Specifications BRAND: Friedrich LENGTH INCHES: 42 WIDTH INCHES: 42 DEPTH INCHES: 21-1/2 HEIGHT INCHES: 16 WEIGHT LBS: 106 ASSEMBLY: Assembled BTU COOLING: 7,700 BTU HEATING: 10,200 CFM HIGH: 345 CFM MEDIUM: 320 CFM LOW: 292 SPEEDS: 3 REFRIGERANT: R-410A COOLING SQUARE FEET: 300 ENERGY EFFICIENCY RATING (EER): 13.0 VOLTAGE: 208/230 AMPS: 3 WATTS: 640/620 WATTS COOLING: 640 DEHUMIDIFICATION PINTS / HOUR: 1.7 MOISTURE REMOVAL: 1.7 Pts./Hr. TYPE: Cooling w/Electric Heat MANUFACTURER'S PART NUMBER: PDE07K3SG OUTDOOR FAN MOTOR HP: 0.024 COMPRESSOR RLA: 2.8 COMPRESSOR LRA: 19 R-410A CHARGE OZ: 23.63 POWER FACTOR: 0.97 APPLICATION: Commercial